Troubleshooting


	
    

GEN 4 (Z 1200/2400) TROUBLESHOOTING

Controlling Signal Levels Analog vs. Digital

Singlemode Fiber and APC Connectors

GEN 3 (HZ 6001-1/2) TROUBLESHOOTING

Only one Master–Only ONE Red Master Light Per System:

  • If Multiple Lights are on:
    • Replug Electric
    • Check Coax Connection
  • If Single TV is Bad:
    • Check for lights on GigaBOB
    • Replug Patches
    • Change port on corresponding GigaBUD
    • Still no lights-replace GigaBOB
  • If Multiple TVs are Having Problems in One Area:
    • Check status of lights on corresponding GigaBUD: Master/Slave, Power
    • Replug electric on corresponding GigaBUD
    • Make sure all “Coax Out” ports are terminated
  • If Multiple TVs are Having Problems over Several Closets:
    • Check fiber link
    • Check previous GigaBUD in cascade for lights; Master Slave, power, etc.
  • If TVs are Out Over Entire Campus or Building or Experience Poor Picture Quality:
    • Check Master Unit
    • Check service provider feed

More  GEN 3 Troubleshooting